DTECH DT-6553 USB TO TTL SERIALCABLE 1.8M

DTECH DT-6553 USB to TTL Serial Adapter, Up to 3M Serial Data Transfer Rates, 3.3V Debug Cable TX RX Signal, 4 Pin Female Socket, PL2303 Prolific Chip, 1.8 Meters Cable Length, Black | DT-6553

• USB 2.0 full speed, back compatible with USB1.1, USB1.0
• PL2303TA chip on PCB board
• PCB board pinout (USB end): TXD, RXD, CTS, RTS, VCC, GND
• 4 pins wired (2.54mm header end): TXD, RXD, VCC, GND
• VCC supports 3.3V and 5V supply output
• UART interface supports 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
• Serial data transfer rates up to 3M
• Internal EEPROM with users writable area
• Data signal levels: +3.3v or +5v optional
• Support VID, PID and other reprogrammed function

DTECH USB to TTL serial UART converter cable provides a fast, simple way to connect devices with a 3.3V TTL level serial interface to USB port. It integrates PROLIFIC PL2303TA USB to serial UART interface IC device.

The PL2303TA chip used is housed within the USB A connector. The cable is terminated with a 4 pin 0.1 inch pitch header socket which provides access to the transmit (Tx), receive (Rx), VCC and GND connections.

The USB serial converter cable required USB driver, available from prolific website (https://prolificusa.com/product/pl2303ta-usb-serial-uart-bridge-controller/), which are used to make the PL2303TA on the PCB board appear as virtual COM port (VCP driver). It allows users to communicate with the USB interface via a standard PC serial emulation port.